Oven - Clock Functions; Clock Functions Table; Setting The Clock Functions; Activating Heat + Hold (If Applicable) - John Lewis JLFSEC612 User Manual

Oven - Clock functions

Clock functions table

Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER

Setting the clock functions

For Duration and End
function and temperature. This is not necessary
for the Minute Minder
oven function".
1. Use again and again until the display shows
the necessary clock function.
2. Use or to set the necessary time.
The clock function operates. The display shows
the indicator for the clock function you set.
To set the Time Delay function,
first set the Duration
set the End
When the time ends the indicator of the clock
function and "00.00" flash and an acoustic signal
sounds for 2 minutes. The appliance deactivates.
Touch a sensor field to stop the acoustic signal.
Cooker User Manual
Application
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the operation of
the appliance. You can set the MINUTE MINDER at any time, also when
the appliance is off.
set the oven
. Refer to "Setting an
and then
.
With the Duration
, the oven deactivates
automatically.
Activating Heat + Hold (if
applicable)
The temperature for the set oven
function must be above 80°C.
The Heat+Hold function keeps prepared food
warm for 30 minutes after the cooking is
completed.
1. Set the time with the clock functions Duration
and / or End
2. Press again and again until the display
shows the symbol Keep warm
3. Use and the display shows "00:30".
When the function ends, an acoustic signal
sounds. The oven deactivates automatically.
and the End
.
.
27