Ensure that the appliance is switched off before replacing the lamp
•
to avoid the possibility of electric shock.
If the mains power supply cable is damaged, it must be replaced by
•
the manufacturer, its Authorised Service Centre or similarly
qualified persons to avoid an electrical hazard.
To remove the shelf supports first pull the front of the shelf support
•
and then the rear end away from the side walls. Install the shelf
supports in the opposite sequence.
The means for disconnection must be incorporated in the fixed
•
wiring in accordance with the wiring rules.
WARNING: Use only hob guards designed by the manufacturer of
•
the cooking appliance or indicated by the manufacturer of the
appliance in the instructions for use as suitable or hob guards
incorporated in the appliance. The use of inappropriate guards can
cause accidents.
6
Cooker User Manual