Using I-Arpeggio; Turning The Arpeggio On/Off; Continuing The Arpeggio Even After Releasing Your Hand (I-Arpeggio Hold); Selecting The Arpeggio Type - Roland JUPITER-X Owner's Manual

Using I-ARPEGGIO

I-ARPEGGIO is a completely new type of arpeggiator that uses AI to transform your keyboard playing into the ideal arpeggiated phrases.
You can use it to generate ideas for songs, or use it in your live performances.
Performance detection

Turning the Arpeggio On/Off

1.
Press the I-ARPEGGIO [ON/OFF] button
The arpeggiator waits for you to play the keyboard; the moment
you play the keyboard, the arpeggio starts.
To stop the arpeggio, press this once again to turn the arpeggiator
off.
* You can use PART settings to specify the parts for which the arpeggiator
will or will not turn on.
Continuing the Arpeggio Even After
Releasing Your Hand
1.
Press the I-ARPEGGIO [HOLD] button
I-ARPEGGIO [HOLD] button Explanation
The arpeggio continues playing even if you take
On
your hand off the keyboard after playing notes.
The arpeggio stops when you take your hand off
Off
the keyboard.
* You can use PART settings to specify the parts for which HOLD will or will
not be on.
* Depending on the on/off state, the
blinking, or off, with the color that is specified for each state. For details,
refer to "System Parameters."

Selecting the Arpeggio Type

Here's how to change the arpeggio settings for parts 1–4. Some
arpeggio types are heard only for one part, and other arpeggio types
play multiple parts as an ensemble.
Select the type that's closest to the performance that you have in
mind, and edit the tones and parameters to customize the arpeggio.
1.
Turn the I-ARPEGGIO [TYPE] knob
* With the factory settings, changing the type will specify a suitable sound
(TONE) and volume (PART LEVEL). If you want to keep the current tone
settings and change only the phrase, set the system parameter Arpeggio
Set Tone to the OFF setting.
Type
Arpeggio pattern Arpeggio pattern
Rhythm
Rhythm pattern Rhythm pattern
Step edit
User pattern User pattern
to make it light.
(I-ARPEGGIO HOLD)
to make it lit/unlit.
I-ARPEGGIO [HOLD] button is lit,
to select the type.
TYPE 1
TYPE 2
TYPE
RHYTHM 1
RHYTHM 2
RHYTHM
One pattern for each part
PART 1
PART 2
PART 3
PART 4
PART 5

Selecting the Type of Rhythm

Here's how to change the phrase that's played by the rhythm part (part 5).
Select a rhythm that's closest to what you have in mind, and then
edit the tempo, drum kit, and other parameters to customize your
performance.
1.
Turn the [RHYTHM] knob
* With the factory settings, changing the rhythm will also set a suitable
tempo (TEMPO), sound (DRUM KIT), and volume (PART LEVEL). If you
want to change only the phrase while keeping the current tempo and
sound settings, change the SYSTEM parameters Arpeggio Set Tempo and
Arpeggio Set Drumkit each to the OFF setting.

Setting the Arpeggio Tempo

Here's how to set the tempo of the arpeggio. For some sounds, the
tempo of the LFO or DELAY is also synchronized.
1.
Turn the [TEMPO] knob to set the tempo.
Changing the Groove
Modifies the timing at which notes are sounded, producing a shuffle
rhythm. With a setting to center the notes are spaced at equal
intervals. As you increase this setting, you'll get an increasingly
"bouncy" feel as though the notes were dotted.
1.
Turn the [SHUFFLE] knob
Changing the Note Duration
Specifies the duration for each arpeggio note to sound. This
determines whether the sounds are played staccato (short and
clipped), or tenuto (fully drawn out) .
1.
Turn the [DURATION] knob
Part 1 Part 1
Part 2 Part 2
Part 3 Part 3
Part 4 Part 4
Part 5 (rhythm) Part 5 (rhythm)
to select the type.
(SHUFFLE)
to adjust the amount of shuffle.
(DURATION)
to change the duration of the notes.
17