Table of Contents
Advertisement
Simultaneously Switching
User Program and
Transmitting PC Numbers
You can have PC (Program Change) numbers be transmitted
to an external MIDI device when you switch the User
Program on the KR105.
You can register PC number settings to each of the User
Programs, just as you can with button settings and other
settings preferences.
Calling Up the Performance Settings to Be Set
1.
Press the [User Program] button, then touch the name
of the performance setting you want to set.
Setting the Transmission of program changes
2.
Touch <Option>.
3.
Touch <
> <
the following screen.
fig-upgPCset.eps_50
4.
Touch
for the parameter and make the
settings.
Display
Description
This prevents the PC number from being
Tx PC
transmitted (Off), or sets the transmission
Channel
channel (Channel 1–16).
Bank
Sets the Bank Select LSB.
Select LSB
Bank
Sets the Bank Select MSB.
Select MSB
Sets the Program Change messages (Pro-
Program
Change
gram Numbers).
98
> to switch the page to display
5.
Touch <Exit>.
The User Program screen returns to the display.
Touch <Write> to save the setting to the User Program.
For more detailed information, refer to "Saving
Performance Settings (User Program)" (p. 93).
Advertisement
Table of Contents
