Adding Reverberation To The Sound - Reverb Effect - Roland DP-1000 Owner's Manual

Adding Reverberation to the Sound — Reverb Effect
The DP-1000 allows you to add reverberation to what you play on the keyboard. With
the reverb effect, you can get a pleasant reverberation, making it sound as if you were
performing in a concert hall or similar space.
1.
Press the [Reverb] button; the button indicator lights.
Reverberation is added to the sound.
fig.4-08.e
Reverb
2.
Press the [Reverb] button once more; the button indicator goes off,
and the reverb effect is no longer added to the sound.
fig.4-09.e
Reverb
Changing the Reverb Type
The DP-1000 features eight reverb types, 1-8, allowing you to select the preferred reverb
sound.
The higher the reverb type number, the deeper the effect is.
The reverb is reset to type 4 when the power is switched on.
To change the reverb type, hold down the [Key Touch/Demo Song] button and press
one of the keys C3-G3 (corresponding to reverb types 1-8).
<Ex.> Selecting Reverb Type 6
While holding down the [Key Touch/Demo Song] button, press the
F3 key (the fourth white key below Middle C).
Refer to "Functions Assigned to the Keyboard" (p. 24).
fig.4-11.e
While holding down...
Press
Press
Key Touch /
Demo Song
Reverb
lit
Reverb
dark
2 4 7
1 3 5 6 8
F3
C3 G3
Press
Playing the Keyboard
15