Acoustic Processor - Roland BR-800 Owner's Manual

Using Insert Effects
Parameter/
Explanation
Range
TYPE
Select the type of GUITAR TO BASS processor.
JB The sound of a Fender Jazz Bass.
PB The sound of a Fender Precision Bass.
REAR VOL (Rear Volume) *1
Sets the volume of the rear pickup. With a
0–100
setting of 0, there will be no sound.
FRONT VOL (Front Volume) *1
Sets the volume of the front pickup. With a
0–100
setting of 0, there will be no sound.
TONE
0–100 Adjusts the tone.
LEVEL
0–100 Adjusts the volume.
*1 Setting available when TYPE is set to JB.

ACOUSTIC PROCESSOR

This transforms the pickup output of an electro-acoustic
guitar into a richer sound, as though it had been recorded
using a microphone.
Parameter/
Explanation
Range
ON/OFF
Turns the ACOUSTIC PROCESSOR effect
OFF, ON
on/off.
TYPE
Select the type of acoustic processor.
This is a bright sound that emphasizes the
BRIGHT
string resonances.
This is a warm sound that emphasizes the
WARM
body resonances.
BODY
This adjusts the sound of the body reso-
0–100 nances. It controls the tonal warmth that is
distinctive of an acoustic guitar.
LEVEL
0–100 Adjusts the volume.
80
PITCH CORRECT
Corrects inaccuracies in the pitch.
With certain settings, pitch correct can make the pitch
change in a coarse "stair-step" fashion to produce a
mechanical vocal tone.
Parameter/
Explanation
Range
ON/OFF
OFF, ON Turns the PITCH CORRECT effect on/off.
TYPE
Select the type of PITCH CORRECT.
SOFT The pitch will be corrected smoothly.
HARD The pitch will be corrected quickly.
Corrects pitch variation to a stair-step
ELECTRIC
change.
ROBOT Corrects the pitch to the specified note.
SCALE *1
The pitch is corrected to the nearest chro-
CHROMATIC
matic semitone.
The pitch is corrected according to the Key
MAJ (MIN)
setting.
KEY *2
C–B, Cm–Bm Specifies the key of the song you're singing.
NOTE *3
C–B Fixes the pitch.
GENDER
Changes your voice to a masculine or fem-
-10–0–+10
inine character.
OCTAVE
-1OCT, 0, Specifies the amount by which the pitch
+1OCT will change.
*1 Setting available when TYPE is set to SOFT, HARD,
or ELECTRIC.
*2 Setting available when SCALE is set to MAJ (MIN).
*3 Setting available when TYPE is set to ROBOT.
DYNAMICS
Makes the volume more consistent.
Parameter/
Explanation
Range
ON/OFF
OFF, ON Turns the DYNAMICS effect on/off.
DEPTH
0–100 Adjusts the depth of DYNAMICS.
ENHANCE
Adjusts the depth of the Enhance effect.
0–10 Higher settings will give the sound sharper
definition.