Table of Contents
Advertisement
Using Insert Effects
BANK : 4INPUT
12. 4-INPUT MULTI
This is an effect for four-channel microphone recording.
It provides the effects needed for recording with multiple
microphones.
fig.4-InputMulti.eps
-[L.CUT]-[COMP/LM]-[EQ]-[NS]-
-[L.CUT]-[COMP/LM]-[EQ]-[NS]-
-[L.CUT]-[COMP/LM]-[EQ]-[NS]-
-[L.CUT]-[COMP/LM]-[EQ]-[NS]-
Low Cut
Compressor/Limiter
Equalizer
Noise Suppressor
BANK : 8TRACK COMP
13. 8-TRACK COMP/LIM
This provides an independent compressor/limiter for each
track.
It allows you to make the playback volume of each track
more consistent.
fig.8trackComplim.eps
-[COMP/LM]-
-[COMP/LM]-
-[COMP/LM]-
-[COMP/LM]-
=[COMP/LM]=
=[COMP/LM]=
Compressor/Limiter
64
Parameter List
The trademarks listed in this document are trademarks
of their respective owners, which are separate
companies from BOSS. Those companies are not
affiliated with BOSS and have not licensed or
authorized BOSS's BR-800. Their marks are used
solely to identify the equipment whose sound is
simulated by BOSS's BR-800.
COMPRESSOR/LIMITER
This is an effect that produces a long sustain by evening out
the volume level of the input signal. You can switch it to a
limiter to suppress only the sound peaks and prevent
distortion.
Parameter/
Explanation
Range
ON/OFF
Turns the COMPRESSOR/LIMITER
OFF, ON
effect on/off.
MODE
Selects the COMPRESSOR/LIMITER mode.
COMPRESSOR
The effect operates as a compressor.
LIMITER
The effect operates as a limiter.
TYPE
Models the BOSS CS-3 compact effects
BOSS COMP
processor.
This is a compressor that adds an even
HI-BAND
stronger effect in the high end.
LIGHT
This is a compressor with a light effect.
D-COMP
This models a MXR DynaComp.
This models a DAN ARMSTRONG
ORANGE
ORANGE SQUEEZER.
When applied heavily, this compressor
FAT
effect provides a fat tone with a boost-
ed midrange.
When applied heavily, this compressor
MILD
effect produces a sweet tone with the
high end cut.
BOSS LIM
This selects a stereo limiter.
RACK 160 D
This models a dbx 160X.
VTG RACK U This models a UREI 1178.
SUSTAIN *1
Adjusts the range (time) over which
0–100
low-level signals are boosted. Larger
values will result in longer sustain.
Advertisement
Table of Contents
