Saving A Song (Save Current State) - Roland BR-800 Owner's Manual

Saving a Song
(SAVE CURRENT STATE)
On the BR-800, the following content is saved as song data.
• Recorded data
• The state of the mixer (pan, track EQ, etc.)
• Song patches for the insert effect
• Song patches for the mastering effect
• Arrangement/Pattern
• Loop effect
• Utilities
The above content is saved when you stop recording or
when you return to the play screen.
The screen will show a message confirming the save, so you
don't need to be specifically aware of this. However, if you
want to save the song in its current state, proceed as
follows.
1
Press the [MENU] button.
2
Use the CURSOR [ ] [
cursor to "SONG," and press the [ENTER] button.
3
Use the CURSOR [ ] [
cursor to "SAVE CURRENT STATE," and press the
[ENTER] button.
The SAVE CURRENT STATE screen will appear.
4
To save the song, press the [ENTER] button.
* While the data is being updated, the display will indicate
"Keep power on!" Do not turn off the power while this
message is shown.
5
Press the [EXIT] button a number of times to return to
the play screen.
] buttons to move the
] buttons to move the
Editing
109