Table of Contents
Advertisement
Recording
Adjusting the Recording
Level
Here's how to adjust the volume of the recording on the
track.
1
Lower the [MASTER] fader.
2
Turn the [REC LEVEL] knob to approximately the
center position, and slowly raise the [MASTER]
fader.
3
Use the [REC LEVEL] knob to adjust the recording
level.
Adjust the level so that the INPUT level meter moves
within the range of -12 (between -24 and -6)–0 dB.
I
Try to record at the highest volume possible before
the sound begins to distort. If you want to decrease
the monitoring volume, lower the [MASTER] fader.
4
Use the [MASTER] fader to adjust the volume
appropriately for monitoring (listening).
* If you use a connection cable that contains a built-in resistor,
the volume on the connected device may be insufficient. In
this case, please use a connection cable that does not contain
a built-in resistor (such as one from the Roland PCS series).
38
Selecting the Track(s) for
Recording
1
Press one of the track 1–7/8 [REC] buttons to select the
track(s) on which recording will occur.
The indicators on the buttons show the track status as
follows.
Indicator
Explanation
Unlit
Track that will not be recorded
Lit
Track that will be recorded
Blinking
Track that will be loop-recorded (p. 41)
fig.Rec01.eps
The track(s) that can be selected will depend on the
MODE you selected for INPUT.
MODE
Explanation
Mono recording using one track.
You can choose one of the tracks
1–4.
MONO REC
You can also record in stereo by
pressing the track 5/6 [REC] or
track 7/8 [REC] button.
Stereo recording using two tracks.
Press the track 1 [REC] or track 2
[REC] button to select the pair of
STEREO REC
tracks 1 and 2, or press the track 3
[REC] or track 4 [REC] button to
select the pair of tracks 3 and 4.
Simultaneous recording using two
tracks.
Press the track 1 [REC] or track 2
SIMUL REC
[REC] button to select the pair of
tracks 1 and 2, or press the track 3
[REC] or track 4 [REC] button to
select the pair of tracks 3 and 4.
Simultaneous recording using
four tracks.
Press any one of the track 1–4
4TRACK REC
[REC] buttons to select the four
tracks 1–4, or press the track 5/6
[REC] or track 7/8 [REC] button to
select the four tracks 5–8.
Advertisement
Table of Contents
