Table of Contents
Advertisement
Rear Panel
fig.RearPanel.eps
1
2
1
Security Slot (
)
http://www.kensington.com/
2
LINE OUT jacks
These are analog audio output jacks. You can connect them to external audio equipment (e.g., a stereo amp), or to a CD
recorder or similar device to record the BR-800's analog output (p. 116).
3
FOOT SW/EXP PEDAL (Foot switch/Expression pedal) jack
A separately sold foot switch (BOSS FS-5U, Roland DP-2) or expression pedal (Roland EV-5, BOSS FV-500L/FV-500H)
can be connected here.
If a foot switch is connected, you can use your foot to start/stop song playback or to punch-in/out.
If an expression pedal is connected, you can use your foot to control the insert effect.
"Using a Foot Switch/Expression Pedal" (p. 129)
4
LINE IN jack
This is an input jack for analog audio signals. You can connect the output of your portable audio player or similar device
to this jack.
5
INPUT 1–4 jacks
These are microphone/line input jacks/connectors. Two types are provided: mono phone jacks (TRS balanced input)
and XLR connectors (balanced input).
The XLR connector of INPUT 4 is able to provide 48V phantom power. The mono phone jacks accept both balanced and
unbalanced connections.
"Using a Condenser Microphone (PHANTOM POWER)" (p. 140)
* You can't use the mono phone jack and the XLR connector simultaneously for the same input. Do not connect plugs to both
simultaneously.
3
4
Panel Descriptions
5
17
Advertisement
Table of Contents
