Adding A Sense Of Spaciousness; Adjusting The Loop Effect Depth - Roland BR-800 Owner's Manual

Adding a Sense of Spaciousness

By making use of the BR-800's onboard "Loop Effects," you
can add a sense of spaciousness and depth to your sounds.
You can adjust the effect depth by adjusting the send level
from each input or track to the loop effect.
Since each input and track has its own independent send
level, you can make adjustments separately; for example,
you might apply deep reverberation to the vocal, but
shallow reverberation to the drums.
Adjusting the Loop Effect
Depth
Here's how to adjust the send level of each track to change
the depth of the loop effect.
1
Press the [TRACK] button.
2
Use the CURSOR [ ] [
cursor to "REVERB" or "CHO/DLY," and press the
[ENTER] button.
The send level edit screen will appear.
For REVERB
D_Reverb_Track1.eps
For CHO/DLY
D_Chorus.eps
] buttons to move the
3
Use the CURSOR [ ] [
adjust the send level of each track.
* You can move the cursor to each track by pressing that
track's track [REC] button.
To adjust the send level of the input source, move the cursor
to "INPUT." To adjust the send level of the rhythm, move
the cursor to "RHY." Then use the dial to edit the setting.
4
When you've finished adjusting the send levels,
press the [EXIT] button a number of times to return to
the play screen.
] buttons and the dial to
83