Table of Contents
Advertisement
Loop Recording
Loop recording is a function that copies the recorded data
when you stop recording, making it occupy approximately
200 measures.
By using Loop recording you can easily create looped
phrases that repeat the same phrase a number of times.
fig.looprec-e.eps
Start recording
Stop recording
1
Press the desired track 1–7/8 [REC] button a number
of times to make track 1–7/8 [REC] button blink.
fig.LoopRec.eps
Blinking
2
Record as described in "Recording" (p. 40).
When recording ends, the recorded data will be copied
so that it occupies approximately 200 measures.
Playback
1
Press the [ZERO] button.
The time location of the song will return to 00:00:00-
00:0.
2
Press the [PLAY] button.
The [PLAY] button will light green, and playback will
begin.
You can use the track faders to adjust the playback
volume of each track.
Approximately
3
200 measures
To stop playback, press the [STOP] button.
Recording
41
Advertisement
Table of Contents
