Table of Contents
Advertisement
Using Mastering in Creating a Song
12
When you've finished mastering, press the [STOP]
button.
The result will be saved on the mastering-destination
track, and the PREVIEW screen will appear.
D_Master_Preview.eps
If you press the [PLAY] button, the result of mastering
will play back.
Use the [MASTER] fader to adjust the volume.
Press the [EXIT] button to return to the MASTERING
screen.
* The display will indicate "Keep power on!" while the data is
being updated. Do not turn off the power while this message
is shown.
13
To exit MASTERING mode, turn MASTERING
"OFF."
Editing the Mastering Effect
Settings
To create a new patch, choose the existing patch that's
closest to what you have in mind, and then edit its settings.
If you want to keep the edited settings, save them as a user
patch or song patch.
1
Press the [MASTER FX] button.
The MASTER FX select screen will appear.
MasteringFX-e.eps
P: preset / S: song / U: user
Number
114
2
3
D_MTK.eps
4
5
Patch name
Choose a mastering effect.
Use the CURSOR [
] [
] buttons and the dial to
select preset/song/user and the desired number.
Press the [ENTER] button.
The mastering effect edit screen will appear.
Use the CURSOR [
] [
] buttons to move the
cursor to each parameter, and use the dial to make
settings.
For details about the effect settings, refer to the
following section "Parameter List" (p. 115).
If you want to save the current effect settings, proceed
as described in the following section "Saving the
Mastering Effect Settings (Write)" (p. 115).
The changes you make are temporary. If you leave
the edit screen without saving the edited patch, an
"*" is shown at the patch indication. If you select
another patch when this "*" is shown, the edited
patch will revert to its original state, and your
changes will be lost.
Advertisement
Table of Contents
