Table of Contents
Advertisement
Playing Back Repeatedly (Repeat)
Setting the Repeat Region to
an Exact Interval
Normally, the repeat start/end points will be set to the
moments at which you press the [REPEAT] button,
meaning that the repeat region might not be set precisely as
you intended.
In such cases, you can use the "Quantize" feature so that the
repeat region will be set in precise one-measure units
regardless of the timing at which you press the [REPEAT]
button.
To use Quantize, make the following settings.
1
Press the [MENU] button.
2
Use the CURSOR [
] [
cursor to "SYSTEM," and press the [ENTER] button.
3
Use the CURSOR [
] [
cursor to "AB QUANTIZE," and use the dial to
change the setting to "ON."
If this if OFF, Quantize will not be applied.
D_System_AB.eps
4
Press the [EXIT] button a number of times to return to
the play screen.
If you use Quantize when specifying the repeat
region, and you change the tempo after making the
setting, the repeat start/end points will no longer
match the beginning and end of the measure.
44
] buttons to move the
] buttons to move the
By pressing the [REPEAT] button twice at the same
location, you can set the repeat region to a single
measure.
Advertisement
Table of Contents
