Trimming Silent Regions At The Beginning And End Of A Track (Trim In/Out) - Roland CD-2 Owner's Manual

More Functions
Editing a CF Card (continued)
Insert the CF card that you want
1
Preparations
to edit.
common to all
CF card editing
2 Press the CF card
operations
select the CF card as the source.
Trimming Silent Regions at the
Beginning and End of a Track
(Trim In/Out)
When recording an instrumental or vocal performance, you
might start recording somewhat earlier than the actual
beginning of the performance and stop recording somewhat
later than the actual end, so as not to lose any of the
performance.
In such cases, there may be an unwanted silence at the
beginning or end of the track.
The CD-2 lets you trim such silences from the beginning or
end of the track, so that the sound will begin the moment you
start playing the track.
MEMO
• If the CF card does not have enough remaining free
space, you won't be able to execute the Trim In/Out
operation.
Start Point and End Point
If you want to trim silent regions from the beginning or end of
a track, you must first specify the desired Start Point and End
Point. The silent regions will be trimmed as shown below,
according to the Start Point and End Point you specify.
• Start Point: The location at which the sound begins.
• End Point: The location at which the sound ends.
Beginning of the track
Delete
Silence
Start Point
Beginning of the track
Start Point
MEMO
• You can't specify Start Point and End Point locations that
would cause the edited song to be less than four seconds
long.
60
button to
End of the track
Delete
Silence
End Point
End of the track
End Point
Trimming Silence from the Beginning of a Track
1
Use or
want to edit.
2
Press until "TRIM IN" appears in the
display.
3
Press .
The trim in editing screen appears.
Number of the track you're editing
4
On the CF card side, press
The track will begin playing.
5
At the desired Start Point, press
the CF card side.
Four seconds of sound preceding the Start Point will
play repeatedly.
Plays repeatedly
Four seconds
Start Point
6
Turn to precisely adjust the Start
Point.
• Turn [DATA] clockwise/counterclockwise to move
the Start Point forward or backward in small steps.
• Slowly turn [DATA] to adjust the Start Point so that
you don't hear the beginning of the sound.
to select the track you
.
on