Roland CD-2 Owner's Manual page 61

7
Press .
The message "Are You Sure?" appears.
8
To execute the Trim In operation,
press .
(If you decide to cancel, press
The Trim In operation will be carried out. Once it's
complete, you're returned to the original readout.
Trimming Silence from the End of a Track
1
Use or to select the track you
want to edit.
2
Press until "TRIM OUT" appears in
the display.
3
Press .
The trim out editing screen appears.
Number of the track you're editing
4
On the CF card side, press
The track begins playing.
5
.)
6
7
8
.
At the desired End Point, press
the CF card side.
Four seconds of sound following the End Point will
play repeatedly.
Turn to precisely adjust the End
Point.
• Turn [DATA] clockwise/counterclockwise to move
the End Point forward or backward in small steps.
• Slowly turn [DATA] to adjust the End Point so that
you don't hear the end of the sound.
Press .
The message "Are You Sure?" appears.
To execute the Trim Out operation,
press .
(If you decide to cancel, press
The Trim Out operation will be executed. When it has
been completed, you're returned to the original
readout.
on
Plays repeatedly
Four seconds
End Point
.)
61