Creating A Music Cd; Make A Disc Playable In A Conventional Cd Player (Finalize) - Roland CD-2 Owner's Manual

Creating a Music CD

Make a Disc Playable in a Conventional CD Player (Finalize)

In order for a CD-R/RW disc you've recorded on the CD-2 to
be playable in a conventional CD player, you must "finalize"
the disc.
A finalized CD-R disc or CD-RW disc can be played back as a
music CD in a CD player that supports CD-R or CD-RW
playback, respectively.
CD player that supports
CD-R (CD-RW) playback
Finalized
Playable
disc
Unfinalized
Not playable
disc
NOTE
• We cannot guarantee that music CDs created by the
CD-2 will play back on all CD players. Depending on its
degree of support for CD-R/RW discs, your CD player
may be unable to play them correctly.
MEMO
• No more data can be written/recorded to a CD-R/RW
disc that has been finalized, even though there may be
space remaining on the disc.
However, in the case of a CD-RW disc, you can remove
the finalization and add/record additional material.
Page 65, "Removing Finalization"
50
1
2
The CD-2
Playable
Playable
3
Insert the CD-R/RW disc that you want to
finalize.
Page 26, "Inserting a Disc"
Press .
The "Are You Sure?" message appears.
To finalize the disc, press
(If you decide to cancel, press
The disc is finalized. During this process, a timer is
displayed, counting-down the time until finalization is
completed.
Counting-down
When finalization is completed, the CD-R/RW disc is
ejected. Your music CD is now ready.
.
.)