Switching The Video Automatically (Video Follows Audio); Fading-In/Out The Program Output Video - Roland VR-50HD MK II Reference Manual

Video Operations
Switching the Video Automatically
(Video Follows Audio)
This detects the audio that is input from a mic, and automatically
switches to the specified video according to the volume (Video
Follows Audio function).
For example, if you're streaming a talk show or a conversation, you
can use this to switch between a closeup of the individual who is
speaking and a wide shot of both people when neither person is
speaking.
1
Press the [MENU] button 0 touch Audio <Video Follows
Audio>.
2
Touch a menu item, and edit its setting.
Switch pages, and set the necessary menu items.
Menu item Explanation
Specifies the video that is output when audio is
Target
detected.
Specifies the reference level at which the Video Follows
Threshold Audio function operates. When audio that exceeds this
threshold is detected, the video is switched.
Specifies the video that is output when audio is
Mix detected in multiple mics. If this is "OFF, " video is
switched in the order in which audio is detected.
Specifies the video that is output when there is no
Silent
audio input from any mic. If this is "OFF, " the last-
selected video continues to be output.
Specifies the time after the video has switched until
Time
audio detection resumes.
3
Touch <Video Follows Audio> to turn it "ON."
The video follow audio function turns on.
4
Press the [MENU] button to close the menu screen.
MEMO
5 The "MIC 5" and "MIC 7" settings are valid only if the audio
sources of channels 5/6 and 7/8 (p. 24) are respectively mics.
5 This function does not operate simultaneously with the Audio
Follows function (p. 27). If this function is turned on, the Audio
Follows function automatically turns off.
16

Fading-In/Out the Program Output Video

Here's how to perform a fade-out from the program output video to a
black screen, or a fade-in from a black screen to the program output
video.
A scene that you don't want to output as video can be changed to a
black screen.
* A fade-in/out effect can be applied only if mix or wipe is selected as
the transition effect.
1
Press the [OUTPUT FADE] button.
Unlit:
Blinking: Fading-in/out
Lit:
The program output video fades-out to a black screen.
When fade-out is complete, the [OUTPUT FADE] button is lit.
2
To fade-in, press the [OUTPUT FADE] button once again.
The [OUTPUT FADE] button blinks, and program output begins.
When fade-in is complete, the [OUTPUT FADE] button goes dark.
MEMO
5 You can also fade-in/out to a white screen.
Use the [MENU] button 0 System <Setup> 0 <
set Output Fade "Color" to "White. "
5 The time required for fade-in/out is determined by the setting
of the [TIME] knob.
Normal output
Faded-out completed
> 0 and