Roland CD-2 Owner's Manual page 35

4
Preparing the CF Card
1 Press on the CF card side.
The CF card is selected as the source.
2
Press or
that you want to play back.
3
Adjust the playback level of the CF
card.
Page 38, "Temporarily Adjusting the Playback
Level of a Music CD or CF Card"
If necessary, you can also adjust the input level of
the mic or guitar so that the overall balance is
appropriate (Step 3-
5
Repeatedly press
appears in the display.
Now you are ready for overdubbing.
CF track number
you're playing back
MEMO
• Canceling overdubbing
To cancel overdubbing, repeatedly press
[OVERDUBBING] until its indicator goes out.
You can also cancel overdubbing by pressing
CF card side.
to select the track
3 ).
until "CF →CF"
CF track number
you're recording
on the
6
On the CF card side, press
Recording begins. While you listen to the playback of
the track you selected in Step 4, perform your
additional vocal or instrumental part to record it.
• If you're overdubbing with a song from a CF card,
the upper right of the screen will indicate
"CF→CF."
7
When you're finished recording,
press on the CF card side.
The newly recorded track is added at the end of the CF
card. Play back the last track (
result of your overdubbing.
.
Page 44) to hear the
35