Roland CD-2 Owner's Manual page 85

■ CD-Related Problems (continued)
Problem
Can't record (continued)
After recording, the CD
won't play back on a
conventional CD player
SMF data written to a
CD-R/RW disc is not
recognized
The disc tray will not open
CD-R/RW drive produces
significant mechanical
noise when operating
■ CF Card-Related Problems
Problem
The CF card is not
detected
The CF card won't play
back
●
Are you using a generic CD-R/RW disc?
➔
Use a CD-R/RW disc from a recommended manufacturer.
●
Did you finalize the disc after recording?
➔
Execute the Finalize operation.
●
Is your CD player able to play back CD-R or CD-RW discs?
➔
If your CD player does not support CD-R or CD-RW discs, they may not play back
correctly.
●
Could the filename contain double-byte (e.g., Japanese) characters?
➔
Filenames containing double-byte (e.g., Japanese) characters will not be
recognized.
●
Is the CD-2 powered up?
➔
Turn on the power of the CD-2.
If a power failure has occurred, you can use the emergency eject hole to open the
disc tray manually.
●
Could you be using a high-speed compatible CD-RW disc?
➔
If you're using a high-speed compatible CD-RW disc, performing the following
operations will cause the disc to rotate at high speed, producing a greater level of
mechanical noise. This is not a malfunction.
• When you stop recording
• When you delete a track
If you find the mechanical operating noise of the CD-R/RW drive objectionable,
please use an 8x compatible CD-R disc or a 1-4x compatible CD-RW disc.
●
Could the CF card be of a capacity that is not supported?
➔
Check the capacity of the CF card, and use a card of a capacity supported by the
CD-2.
●
Is the CF card inserted all the way into the slot?
➔
Make sure that the card is oriented correctly, and that it is pushed all the way into
the slot.
●
Could you have turned off the power while recording, or could the CF card have
been subjected to strong impact?
➔
It is possible that the data has been damaged. Reformat the CF card.
●
Could you have inserted a CF card on which nothing has been recorded?
➔
Insert a different CF card.
●
Could you be using Repeat playback?
➔
Press [1/ALL] enough times to turn off the Repeat icon (
●
Could you be using A-B Repeat playback?
➔
Press [A-B] to get the A-B Repeat icon (
➔
Alternatively, press the CF card [Stop (
will be defeated.
●
Is the CF card [Play (
➔
If the button is blinking, the CF card is paused. Press [Play (
Cause and Action
• When you assign a song number
• When you finalize
Cause and Action
) to disappear.
)] to stop playback. A-B Repeat playback
)] button blinking?
See
Page
18
50
—
—
24
26
—
See
Page
18
27
63
—
/ ). 44
45
45
)] to defeat pause. 44
85