Plb Playback Start (During Phrase Play Busy Out; Pll Playback Start - Left Channel (Dual Mono Mode) - Roland AR-3000SD Command Reference Manual

PLB Playback Start (During Phrase Play Busy Out On)
Function: Playback Start (when During Phrase Play Busy Out setting is on)
Syntax:
stxPLB;
Syntax:
PLB
Note: If the playback phrase has not been specified, the default value (A0001) will be used. The
phrases specified by the PA command will be played back consecutively. When multiple
phrases are played back in sequence, Busy Out signals are also output during intervals
between phrases.
* If Dual Mono Mode is ON
Since phrases will be played back from the L or the R output depending on whether they
are odd or even numbered phrases, phrases specified by the PA command will
automatically be assigned to the playback memory; odd-numbered phrases will be played
back from the L output, and even-numbered phrases will be played back from the R
output. It is not possible to playback the L and R channels independently. Compatible
with mono phrases. Not compatible with stereo phrases. For more details, refer to the
AR-3000SD Owner's Manual.
Example)
PA:A0001,A0003,A0007,A0006,A0010
When Dual Mono Mode is on and the above phrases are specified with the PA command,
the phrases are played back in sequence. Phrases A0001, A0003 and A0007 are played
through the left channel and phrases A0006 and A0010 are played through the right
channel.

PLL Playback Start - Left Channel (Dual Mono Mode)

Function: Playback Start of the left channel
Syntax:
stxPLL;
Syntax:
PLL
Example)
PA:A0001,A0003,A0007,A0006,A0010
When Dual Mono Mode is on and the above phrases are specified with the PA command,
phrases A0001, A0003 and A0007 are played back in sequence through the left channel.
Note: Odd-numbered phrases specified with the PA command are played back in sequence
through the left channel. If no playback phrase is specified with the PA command, phrase
A0001 is assigned and played back. (* If no phrases are available, the ER command is
output.)
Compatible with mono phrases. Not compatible with stereo phrases.
For more details, refer to the AR-3000SD Owner's Manual.
Caution: If the AR-3000SD is not set to Dual Mono Mode, the ER command is output.
(RS-232C, Command format: Type 1)
(Telnet, Command format: Type 1)
(RS-232C, Command format: Type 1)
(Telnet, Command format: Type 1)
AR-3000SD (Ver.1.00) Command Reference - 33