Playback Status Display - ETC Ion Xe Operating Manual

You may still hold [Time] on Eos or double press [Time] on Eos Ti and Gio to view the discrete time
behind any parameter or category.
The display will remain in this state until you disengage it by pressing [Flexi] again.
About & Display Toggles
While in Live/Blind, you can use the [About] key to view additional information.
When in an [About] mode, the mode type will display in the upper left hand corner of the Live/ Blind
display.
The following is a list of the [About] modes available in the Live/ Blind displays:
Note:
[About] & [Data] - displays the background level information.
[About] & [Park] - displays the parked levels.
[About] & [Part] - displays the cue part number for each parameter.
[About] & [Cue] - displays the source target type and number. For cues, the cue list and cue
number that contained the last move will display.
[About] & [Mark] - displays the mark cue used by the channels.
[About] & [Next]/[Last] - displays the next cue with that the channels move in or the last cue
with that the channels moved in.
[About] & [Label] - displays the reference labels.
[About] & [Time] - displays the discrete time.
[About] & [Path]/{Color Path} - displays the color paths.
Note:
down.

Playback Status Display

The playback status display (PSD) allows you to view a range of cues in the current cue list, all cue
attributes for those cues, and a view of the fader configurations for 10 pages of 10 faders each (for a
total of 100 visible faders.
On Element 2, the playback status display (PSD) allows you to view a range of cues in the cue list and
all the cue attributes for those cues. Fader information can be viewed in the
The PSD opens on Tab 2. This display cannot be closed, but you can have multiple instances of the
PSD open on different tabs.
Holding down [Time] (the one by [Data]), while a cue is fading, will display the cue category times
counting down in the cue list display area. The default action is to show the total time not the count-
down.
To always show the countdown, a {PSD Time Countdown} option is available in PSD configuration
menu (see
enabled, the cue category times will countdown as a cue is fading. To see the total time, hold down
the [Time] key. {PSD Time Countdown} is "disabled" by default.
68
Double press [About] & [key] to latch the mode.
To page while in these modes, release the second button while keeping [About] held
Playback Status Display Configuration (on
fader status display
page 74)). When the {PSD Time Countdown} is
.
Eos Family Operations Manual