ETC Ion Xe Operating Manual page 168

In-Cell Editing
When disabled, this setting prevents changes to be made to the cells in the Live/Blind and Playback
Status Displays. {In-Cell Editing} is enabled by default.
Note:
Options in the CIA are not affected by this setting.
DirSel.Dbl Clk
When enabled, double clicking a direct select button will act as [Recall From] [Record Target] to place
the entire contents of that preset, palette, or step-based effect on stage. The default for this setting
is "Disabled".
Display Fader Ribbon
When enabled, the fader ribbon will display. The fader ribbon shows the state of Element's faders.
When disabled, the fader ribbon will not display. {Display Fader Ribbon} is enabled by default.
Display Help Prompts
When enabled, Element displays help prompt above the command line. When disabled, the prompts
will not display. {Display Help Prompts} is enabled by default.
Trackball Settings
This screen allows you to select various trackball options.
Swap Pan/Tilt
This touchbutton swaps the directions for Pan and Tilt on a trackball. The default for Pan and Tilt is X
and Y, respectively. When this button is enabled, Pan and Tilt will be Y and X.
Reverse Pan
This touchbutton reverses the direction of Pan.
Reverse Tilt
This touchbutton reverses the direction of Tilt.
Reset
This button resets all three trackball settings back to their default.
166 Eos Family Operations Manual