Macro Editor Display - ETC Ion Xe Operating Manual

[Learn] [2] [Enter] [-] [Group] [6] {Color} [Record] [Learn] - records macro 2 with instructions to
record a target excluding the color data from group 6.
You can also create a macro in live that bumps submasters across fader pages but first you must
have content assigned to the submasters.
For Example:
Write submasters 1 through 5 and 15 through 17, each with its own channel selections at
100%. Then press:
[Learn] [1] [Enter] [Bump1] [Bump2] [Bump3] [Bump4] [Bump5]
[Fader Page]
[Bump15] [Bump16] [Bump17] [Learn]
Once you have created the macro from Live in [Learn] mode, you can easily edit the sequence from
the macro editor display. See

Macro Editor Display

Macro editing is accomplished from the macro editor display. As an alternative to recording your
macro in live, you may create it from this display instead. Open the macro editor display by pressing
[Macro] [Marco], from the browser by navigating to Record Target Lists > Macro Editor, or press
[Tab] [1] [8].
The display is divided horizontally, the top portion displays the macro contents in detail while the bot-
tom portion lists all macros, including the label and contents. Text that displays in blue indicates a
console event, and commands will display in gray text.
While in the macro editor display, any numeric entry on the command line is assumed to be a macro
number. If the macro number entered already exists and [Enter] is pressed, the macro list will page to
the selected macro and the macro content detail section will display all of the contents of the selec-
ted macro. If the macro number entered does not exist in the list and [Enter] is pressed, an empty
macro will be created with the specified macro number.
Storing and Using Macros

Macro Editor Display

(below).
405