Table of Contents
Advertisement
VS8 Sensor Series
3 Sensor Configuration
™
Expert
•
4-pin background suppression, retroreflective, and opposed mode receiver models are configurable using
either the sealed push button or the remote input wire.
•
3-pin fixed field and opposed mode emitter models require no user adjustments.
•
The remote input wire (pin-2/white wire) is used to select light or dark operate or perform the desired TEACH
method. Pulse durations for the remote input wire correspond to the indicated press durations of the push button.
3.1 Remote Configuration – 4-Pin Models
The remote input wire (pin-2/white wire) is used to select light or dark operate, or perform the desired TEACH method.
Closing and opening times for the remote input wire correspond to the indicated press/hold durations of the push button.
3.2 Two-Point Static Background Suppression
Two-point TEACH sets a single switch point. The sensor sets the switch point between two taught target distances, relative
to the shifted origin location.
1. Present the target.
Method
Action
Push Button
Present the first target. The sensor-to-target
Remote
distance must be within the sensor's range.
Input
2. Start TEACH mode.
Method
Action
Push Button
Press and hold push button > 3 seconds.
Remote
Pulse remote input wire > 3 seconds.
Input
3. Present the background or second target.
Method
Action
Push Button
Present the background or second target.
The sensor-to-target distance must be within
Remote
the sensor's range.
Input
4. Configure the sensor.
6
www.bannerengineering.com - Tel: +1.763.544.3164
Result
N/A
Result
> 3 s
BOTH LEDs FLASHING
ALTERNATING
> 3 s
T
Result
BOTH LEDs FLASHING
ALTERNATING
Advertisement
Table of Contents
