Control Surfaces Direction Setup - Freewing A-6E Intruder User Manual

Control Surface Direction and Set Up
After the Airplane is assembled, but before first flight, switch on the radio and ensure the throttle is in the lowest
position. Engage the kill switch if one is assigned. Install a fully charged battery and connect it to the ESC.
Using the radio, ensure that all control surfaces move in the correct direction.
Ailerons
Stick Left
Elevator
Stick Back
Rudder
Stick Left
Flaps
Flaps Down
A-BE Intruder
Item No.: FJ2041
Version No.: FJ2041-VD1
Stick Right
Stick Forward
Stick Right
-12-
EN
II