Volume Adjustment; Distinctive Ringing/Call Treatment; Headset Memory Mode - Polycom SoundPoint IP 33 Series Quick User Manual

Volume adjustment

Press the Press the volume keys to adjust the call volume keys to adjust the call
volume of the active mode. Pressing these keys in idle
state adjusts the ringer volume.
Please note: To conform to regulatory requirements, handset
and headset volume will return to a preset level after each
call, but the configuration can be changed by your system
administrator. Hands-free volume settings will be
maintained across calls.
Ring type
You can select different rings to match your
preferences and distinguish between calls on lines.
To change the incoming ring:
1. Press Press and then select and then select
'Settings > Basic > Ring Type'.
2. Scroll to highlight the desired ring type. Press the
'Play' soft key to hear it.
3.
Press or the 'Select' soft key to accept the
✔
highlighted ring type and then press highlighted ring type and then press
return to the idle screen.
Please note: If you select silent ring, press the line key or
'Answer' soft key to answer incoming calls.
Audible ringer
You can select the default alerting destination for
incoming calls.
To change the audible ringer:
1.
Press Press and then select 'Settings > Basic > and then select 'Settings > Basic >
Preferences > Audible Ringer'.
3.
Scroll to highlight the desired alerting destination
for incoming calls.
4. Select the desired destination and then press Select the desired destination and then press
to return to the idle screen.
0800 040 8888
v1 - 06/13

Distinctive ringing/call treatment

You can set distinctive incoming ringing tones for
different contacts in your local directory.
To set a distinctive ring for a local contact:
1. Press the 'Dir' soft key.
2. Search for the contact (see the 'Contact
directory' section).
3. Press the 'Edit' soft key, then scroll down to
'Ring Type' and press
4. Using
5. Press the 'Ok' soft key to accept the change
and then press and then press
idle screen.

Headset memory mode

For frequent or full-time headset users,
there is an option to default all calls to the headset.
To enable Headset Memory Mode:
1. Press Press
Preferences > Headset > Headset Memory'.
to to
2. Scroll down to 'Enable' and press
it and then press it and then press
idle screen.
To disable Headset Memory Mode:
Repeat steps 1 and 2, but select 'Disable'.
To activate Headset Memory Mode
(if enabled):
Press Press twice. The headset icon will flash. twice. The headset icon will flash.
to edit it.
✔
or , select the desired ringtone.
twice to return to the twice to return to the
and select 'Settings > Basic > and select 'Settings > Basic >
to return to the to return to the
working with daisy
www.daisygroupplc.com
to select
✔