Usb And Sd Card Cover - Leica GM30 User Manual

5.3
USB port and SD
card slot
USB client port
USB host port
SD card slot
SD card capacity
GR30/GM30/GR50, GR50 User Interface

USB and SD Card Cover

Description
The GR50 has a USB host port, USB client port and an SD card slot.
Diagram
a b
GR25_004
The USB client port can be used to:
• connect the GR50 to a computer and access the web interface and FTP server.
• connect the GR50 to a CS10/CS15/CS20 field controller and access the web inter-
face.
The USB host port can be used to:
• connect a USB mass storage device to the GR50 and push MDB and RINEX data from
the SD card.
Data is stored on a removeable SD card.
For more information on how to work with the SD card, refer to "7.3 Working with the
Memory Device"

If no SD card is inserted, data storage is not possible.

Unplugging connection cables or removing the SD card during data logging or
streaming can cause loss of data. Switch off the instrument before removing
the SD card.

While other SD cards can be used, Leica Geosystems recommends only using
Leica SD cards. Leica Geosystems is not responsible for data loss or any other
error that can occur while using a non-Leica card.

SD cards can directly be used in the Leica USB Card Reader (767895 MCR7).
Other computer card drivers can require an adaptor.

If formatting the SD card is necessary, we highly recommend to format the SD
card on the instrument. Refer to the "GR/GM Series Operational Manual (Online
Help)" for detailed instructions.
Maximum supported capacity: 32 GB.
c
a) USB client port
b) SD card slot
c) USB host port
43