Gr30/Gm30 User Interface; Led Indicators On Gr30/Gm30 - Leica GM30 User Manual

4
4.1
LED indicators
Description of the
LEDs
GR30/GM30/GR50, GR30/GM30 User Interface

GR30/GM30 User Interface

LED Indicators on GR30/GM30

Description
The GR30/GM30 has Light Emitting Diode indicators. They indicate the basic instru-
ment status.
Diagram
a b c d e f
GR10_003
IF the is
Power LED off
green
SD card LED off
green
yellow
red
Raw data logging off
LED
green
yellow
red
a) Power LED
b) SD card LED
c) Raw data logging LED
d) RT out data stream LED
e) RT in data stream LED
f) Position LED
THEN
The instrument is turned off.
The instrument is turned on.
No SD card inserted or power is off.
SD card is inserted. The free space on the SD card is
greater than 20%.
The free space on the SD card is below 20%.

Recommended user action: Activate the
Smart clean-up or the automatic file delete
for each logging session.
SD card is full. Data logging has stopped.

Recommended user action: Immediately
activate the Smart clean-up or the automatic
file delete for each logging session.
No active logging sessions or power is off.
Active logging sessions are configured on the instru-
ment and data is being logged.
Active logging sessions are configured and Smart
clean-up is deleting data from all or some of the
configured logging sessions.
OR
Active logging sessions are configured but no posi-
tion is available.

Recommended user action: Check the
remaining space of the SD card and delete old
data if necessary. Check the tracking and
position status.
Active logging sessions are configured but the SD
card is full or no satellites are tracked.

Recommended user action: Check the SD
card and the tracking status.
33