Leica GM30 User Manual page 40

GR30/GM30/GR50, GR50 User Interface
IF the is
SD card LED off
green
yellow
flashing
green
flashing
yellow
red
Raw data logging off
LED
green
yellow
red
RT out data off
stream LED
green
red
THEN
No SD card inserted or power is off.
SD card is inserted. The free space on the SD card is
greater than 20%.
The free space on the SD card is below 20%.

Recommended user action: Activate the
Smart clean-up or the automatic file delete
for each logging session.
Use of external USB drive is configured but the device
is not available. Data is written to the SD card. The
free space on the SD card is greater than 20%.
Use of external USB drive is configured but the device
is not available. Data is written to the SD card. The
free space on the SD card is below 20%.
SD card is full. Data logging has stopped.

Recommended user action: Immediately
activate the Smart clean-up or the automatic
file delete for each logging session.
No active logging sessions or power is off.
Active logging sessions are configured on the instru-
ment and data is being logged
Active logging sessions are configured and Smart
clean-up is deleting data from all or some of the
configured logging sessions.
OR
Active logging sessions are configured but no posi-
tion is available.

Recommended user action: Check the
remaining space of the SD card and delete old
data if necessary. Check the tracking and
position status.
Active logging sessions are configured but the SD
card is full or no satellites are tracked.

Recommended user action: Check the SD
card and the tracking status.
No active data stream is configured or power is off.
One or more data streams are configured and active.
Data is being streamed.
Data streams are active but no data is streamed.

Recommended user action: Check that data
is tracked and a navigated position is avail-
able. Check that the correct reference posi-
tion is entered.
40