Optional Rear Rewind; Installing Rewind Motor Assembly; Operating Rewind Motor - Gfp 865DH Operating Manual

15. Installing Optional Rear Rewind
15 A. Installing the Rewind Motor Assembly
1. Remove 4 screws and inserts bolted inside each side frame
2. Bolt rewind motor assembly to control side frame and rewind bracket to opposite
side frame where the inserts were located
3. Slide cardboard core onto the rewind tube and insert the rewind tube onto the
support brackets
4. Plug rewind motor into power plug outlet at the rear of the side frame
15 B. Operating Rewind Motor
1. Select "Combine" and the rewind shaft will match the speed of the laminator
2. Select "Single" and the rewind shaft runs independent of laminator
3. Adjust the speed or power of the rewind shaft with the Motor Torque knob
a. As the diameter of the rear rewind roll gets larger and the roll gets heavier, the
motor may need additional torque or power to maintain the same speed as the
laminator
4. Select "Forward" for the rewind motor to turn clockwise
5. Select "Reverse" for the rewind motor to turn counter-clockwise
6. Adjust the Shaft Clutch to keep the rewind shaft turning at the same speed as the
machine output
a. As the diameter of the rear rewind roll gets larger and the roll gets heavier, the
clutch may need to be tightened to keep the shaft clutch from slipping
Gfp 865DH
Clutch adjustment
18
February 2018