Rs232 Communication Connector X4; Network Connectors X3A X3B - Panasonic MINAS-A4N Reference Specifications

7-4 RS232 communication connector
You can make a RS232 communication with a personal computer or the handy console, and
make operations such as setup/change of parameters, monitoring of control status, reference
of error status and history and saving/loading of parameters and so on.
This drive supports the setup support software "PANATERM", and its communication cable
as options.
For the operation of the "PANATERM", refer to its instruction manual.
·PANATERM(WIN98/NT/2000/XP)
·Connection cable to PC (DOS/V)
·Console
7-5 Network connectors X3A
RJ45 Connector for network interface
[X3A] RX connector
Name
Unused
Unused
Network input +
Unused
Unused
Network input -
Unused
Unused
Frame ground
[X3B] TX connector
Name
Unused
Unused
Network input +
Unused
Unused
Network input -
Unused
Unused
Frame ground
* Use the shielded twisted pair (STP) cable of category 5e or better specified in TIA/EIA-568 without fail.
Category 6 or better is recommended.
(Note) Use the cable with 8-wire (4 pair), "straight" connection
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
R2
X4 (JST MD-S8000-10 or equivalent)
X3B (Molex 85505-0013 or equivalent)
Pin No.
1 - Connect to Pin-1 of TX connector of node at transmitter side.
2 - Connect to Pin-2 of TX connector of node at transmitter side.
3 RX+ Connect to Pin-3 of TX connector of node at transmitter side.
4 - Connect to Pin-4 of TX connector of node at transmitter side.
5
- Connect to Pin-5 of TX connector of node at transmitter side.
6 RX- Connect to Pin-6 of TX connector of node at transmitter side.
7 - Connect to Pin-7 of TX connector of node at transmitter side.
8 - Connect to Pin-8 of TX connector of node at transmitter side.
Shell FG Connect to the shield of the cable.
Pin №
-
1 Connect to Pin-1 of RX connector of node at reception side.
-
2 Connect to Pin-2 of RX connector of node at reception side.
3 TX+ Connect to Pin-3 of RX connector of node at reception side.
-
4 Connect to Pin-4 of RX connector of node at reception side.
-
5
Connect to Pin-5 of RX connector of node at reception side.
6 TX- Connect to Pin-6 of RX connector of node at reception side.
-
7 Connect to Pin-7 of RX connector of node at reception side.
-
8 Connect to Pin-8 of RX connector of node at reception side.
Shell FG Connect to the shield of the cable.
No.SX-DSV01676
DV0P4460
DV0P1960
DV0P4420
Description
Description
Motor Company, Matsushita Electric Industrial Co., Ltd.
- 21 -