Servo Drive And List Of Applicable Peripheral Equipments - Panasonic MINAS-A4N Reference Specifications

12-3 Servo drive and list of applicable peripheral equipments

Servo
Voltage
motor
drive Spec.
100V, single-
phase
MADD MSMD
200V, single-
phase
100V, single-
phase
MBDD MSMD
200V, single-
phase
100V, single-
MSMD
phase
MCDD
200V, single-
MSMD
phase/3 phase
MDMA
200V, single-
MDDD
phase/3 phase
MDMA
MDMA
MEDD 200V, 3 phase
MDMA
MFDD MDMA 200V, 3 phase
*Select the single/3-phase common drive based on the power supply to be used.
● Manufacturer of circuit breaker and magnetic contactor: Matsushita Electric Works, Ltd.
Connect a circuit breaker which conforms to IEC Standard and is UL recognized (UL Listed and marked) between
the power supply and the noise filter without fail in order to make the machine conform to EC Directives.
● For details of noise filter, refer to section 12-2-4.
<Remarks>
●Select the circuit breaker and noise filter matching to the power capacity (including the load condition).
●Terminal block and earth terminal
Use a cable of copper conductor with temperature rating of 60degrees or higher.
Protective earth terminal is M4 for A to D-frame.
Use an earth cable with diameter of 2.0mm2 (AWG14) or larger for 50W to 1.5kW
●For A to D-frame, use the attached exclusive connector and keep the peel-off length of 8 to 9mm.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
R2
Circuit
Rated Noise
Breaker
output filter
(Rated
current)
50W～
100W
50W～
DV0P4170 DV0P4190
10A
200W
200W
400W
400W DV0P4180
750W 15A
1kW DV0P4220
1.5kW 20A
2.5kW
30A
3.0kW
DV0P3410
5.0kW 50A
Noise filter
Surge Electromagnetic
for signal
absorber contactor
line
BMFT61041N
(3P+1a)
BMFT61541N
(3P+1a)
BMFT61041N
(3P+1a)
BMFT61541N
(3P+1a)
BMFT61541N
(3P+1a)
DV0P1460
BMFT61042N
(3P+1a)
BMFT61042N
(3P+1a)
DV0P4150
BM6352N
(3P+2a2b)
BM6652N
(3P+2a2b)
Motor Company, Matsushita Electric Industrial Co., Ltd.
No.SX-DSV01676 - 44 -
Control
Main
Power
circuit cable
Cable
diameter feminalblock
diameter
0.75mm2
0.75～2.0mm2
AWG18
AWG14～18
Connect to the
2.0mm2
AWG14
2.0mm2
AWG14
3.5mm2
AWG11
5.3mm2
AWG10
Teminals
on the
exclusive
connectors.
M5