Safety Precautions On Using The Drive - Panasonic MINAS-A4N Reference Specifications

(10) Pay attention to heat dissipation.
Servo drive will generate heat while driving the motor. Temperature of the control box may increase
extraordinary while the servo drives are used in an enclosed control box. Take a necessary cooling
measure so that the ambient temperature may not exceed the working range.
(11) Do not place the drive nearby a heater or heat generating object such as large winding resistor.
(Install a heat shielding plate so that the heat might not affect the drive.)
Ambient temperature of the drive
Life of the drive is affected largely by ambient
temperature. Make sure that the ambient temperature
around 50mm from the drive may not exceed the
Operating temperature
Operating temperature
range

10. Safety precautions on using the drive

(1) Never touch the inside of the drive. Repair should be performed by an authorized dealer or by us.
(2) Internal circuit will be kept charged by high voltage for a while after turning off the power. Wait for more
than 15 minutes before making a transportation, wiring and inspection after shutting off the power input
externally .
(3) Do not get close to the motor and the machine driven by the motor while turning on the power by way
of precaution to malfunction.
(4) Turn off the power if the machine has not been/will not been used for a long time.
(5) When an alarm has occurred, remove the cause, and then start it again. If you start without removing
the cause, it may result in motor runaway or burnout.
(6) Capacitor in rectifying circuit of the power will loose its capacity over the years. It is recommended to
replace it in 5 years to prevent secondary accident. Replacement should be done by a authorized
dealer or us.
Maximum effort has been paid by us to secure the quality of our drive, however,
unexpected behavior might occur when the drive is subjected to a larger external
noise or static electricity than estimation, or when input power, wiring and
components are in failure. Extra attention should be paid to secure safety for
unexpected actions.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
R2

Safety precautions
:０ to ５５degrees
(Installation example : when no fan is used in the control box)
No.SX-DSV01676
Motor Company, Matsushita Electric Industrial Co., Ltd.
- 39 -