Control Points (Model 2750); Clock Setup (Model 2750); Logging Setup (Model 2750) - Kanomax Gasmaster 2750 User Manual

Once the concentration has moved back into the alarm limits the settings will reset. To turn of
the mute permanently follow instructions to disable the alarm.

3.4.9. Control Points (Model 2750)

•
The control points can be found under "MONITOR SETUP", scroll down in the monitor set up
menu and select "CONTROL POINTS"
•
Once the control points set up menu has been entered "CONTROL HI" will display
•
Press the "scroll up" and "scroll down" buttons to select the correct concentration
•
Press "enter" to confirm the change
•
Once the high point has been set "CONTROL LO" will display
•
Press the "scroll up" and "scroll down" buttons to select the correct concentration
•
Press "enter" to confirm the change
3.4.10.

Clock Setup (Model 2750)

•
The clock setup can be found under "MONITOR SETUP", scroll down in the monitor set up
menu and select "CLOCK SETUP"
•
To change the hours press the "scroll up" and "scroll down" buttons until correct time is
recorded
•
Press "enter" to confirm and adjust the minutes using the "scroll up" and "scroll down" buttons.
•
Repeat to adjust the seconds, month, day and year.
Note: The clock is a 24 hour clock
3.4.11.

Logging Setup (Model 2750)

•
To enter, scroll down in the set up menu and select "LOGGING SETUP"
•
The log frequency will appear on the display.
•
Adjust the frequency by using the "scroll up" and "scroll down" buttons
Note 1: The frequency is set to 1 minute intervals
•
Once the frequency is set, press the "enter" button to confirm.
•
The option to clear the log will then display on the screen.
•
Press the "scroll up" button to select either YES or NO and press "enter" to confirm the
selection.
Kanomax Gasmaster User Guide
MRK-D-0002 V3
14:30:12
Oct 07 12
Hours: Minutes: Seconds
Month: Day: Year
Page | 13