2.3.
Optional Temperature and Relative Humidity Sensor
If the temperature and relative humidity sensor has been purchased, it can be inserted into the PS/2
connector at the base of the monitor. Ensure monitor is turned off before connecting the sensor.
Note: The monitor will still operate with only the temperature
and RH sensor connected.
3.
Operation
The following instructions detail the operation and set up of the monitor:
3.1.
Model 2710 Display
Power button /
Scroll button
3.2.
Model 2750 Display
Power button
Alarm mute
Kanomax Gasmaster User Guide
MRK-D-0002 V3
Two Way
Adaptor Cable
Temperature &
Relative
Humidity Sensor
USB to Monitor
Cable
Enter
Enter
Scroll up
Scroll down
Page | 8