Kipor Sinemaster IG3000 Operation Manuals page 13

2.4.2 Dual-voltage LCD－120/240V
After the system is powered on, self-check indicator lights and buttons are pushed
continually, the following parameters will be displayed in cycle:
(1) Displayed parameters in series connection： （120/240V simultaneous output）
No.
1 Genset AB-Phase voltage
2 Genset A-Phase voltage
3 Genset B-Phase voltage
4 Genset A-Phase current
5 Genset B-Phase current
6 Genset frequency
7 Battery voltage
8 Accumulated running time
(2) Displayed parameters in parallel connection:（120V output）
No.
1 Genset voltage
4 Genset current
6 Genset frequency
7 Battery voltage
8 Accumulated running time
■ LCD back light lights for 10 seconds then goes out automatically once pushed
button.
■ When the current displayed parameter is not "genset voltage", displayed
parameter will switch to No.1 listed parameters after 30 seconds.
■ Parameter will be displayed as"――――――" when voltage selection switch is at
incorrect position.
Parameters
Parameters
CAUTION
7
Unit Note
1 V V
1V V
1V V
1 A
A
0.1 A
1 A
A
0.1 A
0.1 Hz Hz
0.1 V V
0.1 Hour Hr
Unit Note
1 V V
1 A
A
0.1 A
0.1 Hz Hz
0.1 V V
0.1 Hour Hr