Quick Start Guide; Debug Port Connection; Debug Port Setting - Advantech RSB-4221 User Manual

Risc 3.5inch sbc based on ti sitara am3358 cortex a8 1ghz high performance processor

Hide thumbs Also See for RSB-4221:

Table of Contents

2.4

Quick Start Guide

2.4.1

Connect the debug cable to the RSB-4221 debug port. (figure 2.3.1)

Connect the other side of the debug cable to USB-to-RS-232 cable then con-

nect to your PC.

2.4.2

RSB-4221 can communicate with a host server by using serial cables. Common

serial communication programs such as HyperTerminal, Tera Term or PuTTY can be

used in this case. The examples below describe the serial terminal setup using

HyperTerminal on a Windows host:

Connect RSB-4221 with your PC by using a serial cable.

Open HyperTerminal on your Windows PC, and select the settings as shown in

Figure 2-7.

After the bootloader is programmed on the SD card, insert power adapter con-

nector to DC jack on RSB-4221 to power up the board. The bootloader prompt

is displayed on the terminal screen.

Figure 2.20 Hyper Terminal Settings for Terminal Setup

RSB-4221 User Manual

Table of Contents