Possible Safety Hazards; Class I Laser Product - Dell EMC ML3 User Manual

If the symbol is...

Possible safety hazards

Possible safety hazards to the operation of this product are:
Electrical
An electrically charged frame can cause serious electrical shock.
Mechanical
Hazards (for example, a safety cover missing) are potentially harmful to people.
Chemical
Do not use solvents, cleaners, or other chemicals that are not approved for use on this product.
Before the library is used, repair any of the preceding problems.

Class I laser product

Before the library is used, review the following laser safety information.
xvi
Dell EMC ML3 Tape Library: User's Guide
It means...
Risk of hand pinching, can trap hands, fingers and cause serious injury.
Keep hands clear during operation (L012).
The weight of this part or unit is between 18.1 and 33.6 kg (40 and 74 lb). It
takes two persons to safely lift this part or unit. (C009)
The weight of this part or unit is between 33.6 and 46.3 kg (74 and 102 lb).
It takes three persons to safely lift this part or unit. (C010)
A hazardous condition due to the unit's susceptibility to electrostatic
discharge.