Table of Contents
Advertisement
Adding another ZXT- 600 AC Master
The procedure to add another ZXT-600 unit is the same as adding the previous one!
Log in the Touchwand application and click on the Add unit button in the Units sub-menu. After
powering the ZXT-600 unit with batteries or through USB cable, pair the two devices. Once the
pairing is completed, name the unit in the application.
After the device is named, assigned to a room and the configuration is done, the user is able to
use the second AC. The newly added device will also be visible in the Units sub-menu.
Utilization
Once the configuration is done, the user is able to activate and control the AC. In the Control unit
section in the panel, there is possibility to:
turn the AC ON or OFF,
set different modes – cool, heat dry or auto
set the temperature
control the fan - low, medium, high or auto
Setting scenarios
The user is able to create their own scenarios in a very simple and easy way!
In the application go to the sub-menu Scenarios located below the dashboard. After opening the
Scenarios, click on Add Dynamic Scenario button.
Add the name of the scenario which in this case can be - ZXT-600 AC Master Time scenario.
Set the condition – for example 15 minutes before sunrise every Friday and Saturday the air
conditioner will be turned on with the desired temperature.
29
Advertisement
Table of Contents
