Table of Contents
Advertisement
The PIMA alarm has flood, motion, magnet and smoke sensors. Every sensor reports via the alarm
application to Wanderfull about his status. System identifies the statuses and it is activating them
accordingly (when the alarm system is triggered/neutralized).
ZXT-600 AC Master
The ZXT-600 AC Master is a Z-Wave plus compliant Z-Wave-to-IR bridge to control split air
conditioner by receiving Z-Wave commands and translating to Infrared command. The unit can
control different brands and models of air conditioners worldwide. It has a built-in air conditioner
IR codes, IR learning back up and works as a Z-Wave thermostat. For more details, please see the
ZXT-600 AC Master installation guide.
Get Started
Log in the application and apply power to ZXT-600 AC Master
- Log in the Touchwand application from the following link:
http://cloud.touchwand.com/login.html?path=/
enter user credentials and click on the Submit button.
- Power the ZX T-600 AC Master unit by placing two batteries (2x AA 1.5V) or a USB port.
- Once the application is open select the sub-menu Units located below the dashboard.
Pairing the devices
- Click on the ADD UNIT button. The application will generate another form, where the type of
the unit that should be selected is a Z-Wave unit. Continue by clicking on the PAIR button.
26
Advertisement
Table of Contents
