Table of Contents
Advertisement
To check the operation of the system or to verify that certain conditions are working
properly, the system provides information about all the activities that occurred.
System Log Overview:
You can see the unit type (detector / shutter / lighting) in the left column - Unit.
If the unit is assigned to the room, you can see the division into rooms in the second
column on the left – Room.
The last activity of the system is in the third column on the left – Timestamp.
In the right hand you can see the event or type of change / activity taking place at any
given moment in the same unit that we review a blog – Event.
Skilled installers will test the operation of the various units and situations after building
and operating the different situations.
17
Advertisement
Table of Contents
