Table of Contents
Advertisement
To start pairing the ZXT 600 AC Master unit and the controller, please set the ZXT 600 AC Master
in inclusion mode, meaning click three times on the Pair or "PROG" button within one second. It
is important to click fast enough, otherwise the pairing will be unsuccessful.
While pairing, the second LED light on the controller named Z-wave blinks orange light. In the
application's interface new form will appear as seen in the picture below.
If the LED indicator on the ZXT 600 AC Master emits green light, the unit is in pairing and
resetting mode. If the pairing failed, red light will be emitted from the LED indicator on the
device.
Once the device is paired with the controller, the user should name the unit and allocate it to an
appropriate room.
Configuration
In the sub-menu Units, select the newly added unit and under Configuration Settings section
click on the Add Configuration Settings button.
27
Advertisement
Table of Contents
