Table of Contents
Advertisement
Once the system is connected to the cloud services, every day at 3 AM a complete backup
procedure is performed automatically for the entire management system.
The purpose of the backup is to create redundancy or an option for a client or installer
that have settings that are incompatible with current status or requirements.
If a particular unit is damaged for some reason, the installer can reach the customer's
home with another unit and using a name and password to upload the whole system
within a short period of time.
The system rule means the names of the units, the names of the rooms, the groups
defined in the system, the scenarios that were built, the appropriate version, the client
updates and alerts, user names, and user types in the system hierarchy.
Attention should be paid to a customer who chooses to enter using a fixed IP address,
and not via cloud services, it is required to back up the controller via USB backup. In this
case, uploading the latest version depends on the user and his backup time.
In the application this can be done by clicking on two buttons as seen in the picture above:
Create backup to Cloud and Create backup to USB.
If we choose for example the option Create backup to Cloud, one warning message will
appear in the application.
14
Advertisement
Table of Contents
