TouchWand Wanderfull Technical Manual page 25

Setting the serial port
Set the serial output use, regarding the connection to the MS (monitoring station). The MS can be
connected locally, using RS-232 cable, or remotely, through the net4pro IP interface. It can use a
home automation ("Smart home") or PIMA proprietary protocol.

Then Log in the Touchwand application from the following link:
http://cloud.touchwand.com/login.html?path=/
enter user credentials and click on the Submit button.

Open the application and select the sub-menu Units located below the dashboard.

The PIMA alarm will be visible with the rest of devices in the Units section.

Unlike other units, there is no need for pairing this unit. Just click on the Add unit button and
select what kind of unit will be added in the first field in this case PIMA sensor (as seen in the
picture below). Enter the rest of the data that is needed - type, sensor name and zone and
click on the Pair button.
Once this is done, the unit is added to the controller.
25