Laser Plummet - Leica TS11 User Manual

1.6.5
General
CAUTION
Labelling
TS11, Safety Directions

Laser Plummet

The laser plummet built into the product produces a visible red laser beam which
emerges from the bottom of the product.
The laser product described in this section is classified as laser class 2 in accordance
with:
• IEC 60825-1 (2007-03): "Safety of laser products"
• EN 60825-1 (2007-10): "Safety of laser products"
These products are safe for momentary exposures but can be hazardous for deliberate
staring into the beam. The beam may cause dazzle, flash-blindness and after-images,
particularly under low ambient light conditions.
Description
Wavelength
Maximum average radiant power
Pulse duration
Pulse repetition frequency (PRF)
Beam divergance
From a safety perspective, class 2 laser products are not inherently safe for the eyes.
Precautions:
1) Avoid staring into the beam.
2) Avoid pointing the beam at other people.
a
003971_001
a) Will be replaced by a class 3R warning label if applicable
Art.No.:
Type: TS....
. . . . . .
Equip.No.: . . . . . .
S.No.:
Power: 12V/7,4V ---, 1A max
. . . . .
Leica Geosystems AG
CH-9435 Heerbrugg
Manufactured: . . . .
25
Made in . . . . . . . . . .
Complies with FDA performance standards for laser
products except for deviations pursant to Laser Notice
No.50, dated June 24, 2007.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Value
650 nm - 690 nm
0.95 mW
c.w.
c.w.
<1.5 mrad
Laser Radiation
Do not stare into the beam
Class 2 Laser Product
according to IEC 60825-1
(2007 - 03)
Po  1.00 mW
 = 620 - 690 nm
13