Memory Channel Storage (Memory Channels 01-99); Emergency Alarm Feature - Baofeng UV-3R Mark II Reference

3) Clockwise or counterclockwise rotation of [ DIAL ] knob to
select the BCLO: ON/OFF.
4) Press the [ U/V ] key to save the setting.
5) Press [ MENU/LOCK ] or [ PTT ] to EXIT to normal
operation..
MEMORY CHANNEL STORAGE (Memory Channels 01-
99)
•Select the desired frequency while operating in the VFO mode.
Be sure to set up any desired CTCSS or DCS tones, as well as
any repeater offset.
•Press [ F/ALERT ] button, then press [ U/V ] key, Channel 01-
99 will flash on the LCD, rotate [ DIAL ] knob to store the
channel between channel 01-99.
•Press [ U/V ] key to save the setting.
•Repeat the process above, to store other channels.
(Note: Repeater offset frequency should be set via
programming software.)

EMERGENCY ALARM FEATURE

Press and hold the [ F/ALERT ] button about 1/2 seconds, come
to the Emergency Alarm Mode, emergency alarm will be heard,
press [PTT ] button, EXIT to normal operation.
12 June 20, 2012