Table of Contents
Advertisement
Receiver
1
2
1.
LAN - RJ45 Telnet control port
2.
FW UPDATE - USB port for receiver firmware updates
3.
HDBT IN - HDBaseT input to connect to HDBaseT output on transmitter via category cable
4.
STATUS LEDS
• POWER - When solid, the transmitter is receiving power
• SCALER - When solid, the scaler module is working properly
• STATUS - When solid, the transmitter is working properly
• HDCP - When solid, HDCP content is being transmitted, when blinking NON HDCP content is being transmitted
• LINK - When solid, the link between transmitter and receiver is normal. When blinking or off the link between
transmitter and receiver is lost and should be reset
5.
HDMI IN - HDMI receiver input for local HDMI source
6.
HDMI OUT - HDMI output for display connectivity
7.
AUDIO OUT - Stereo analog audio output
8.
FRONT PANEL CONTROL
• AUTO - Enables auto switcher. When LED is on the auto switch function is ON
• HDBT IN - HDBaseT / Transmitter input selector
• HDMI IN - Receiver HDMI input selector
LED indicator status for HDBT and HDMI input:
• When LED is violet, the input has signal and is selected
• When LED is orange, the input has signal but is not selected
• When LED is blue, the input has no signal but is selected
• When LED is off, the input has no signal and is not selected
9.
RS232 - Serial control port for display control / 3rd party control
10. RELAY 1 / RELAY 2 - Relay port 1 and 2 for room peripheral control
11. SCALER UPDATE - USB port for scaler firmware updates
12. DC12V - DC12V - Locking power port to connect DC12V power adapter
3
4
5
6
DL-SE3H1V-C Owners Manual
7
8
9
10
11 12
7
Advertisement
Table of Contents
