Advertisement
Quick Links
DL-S41-H2 Quick Install Guide
This guide is for quick installation only.
For complete owners manual and list of commands, go to www.libav.com or use a
QR reader to access the manual via QR code below.
Scan QR Code with your Smart-phone or Tablet
Rev 180522
11675 Ridgeline Drive
Phone: 719-260-0061
Colorado Springs, CO
Toll-Free: 800-530-8998
80918
Fax: 719-260-0075
Advertisement
Related Manuals for DigitaLinx DL-S41-H2
Summary of Contents for DigitaLinx DL-S41-H2
- Page 1 DL-S41-H2 Quick Install Guide This guide is for quick installation only. For complete owners manual and list of commands, go to www.libav.com or use a QR reader to access the manual via QR code below. Scan QR Code with your Smart-phone or Tablet...
-
Page 2: Product Overview
DL-S41-H2 Quick Guide Product Overview The DL-S41-H2 is an slimline HDMI 2.0b auto switcher with four HDMI video inputs and one HDMI output. This switcher supports HDMI video resolutions up to 4Kx2K@60Hz 4:4:4, HDR, and multichannel audio. In addition to passing EDID information from the display, there are multiple built-in EDID settings to simplify an installation. -
Page 3: Front And Rear Panels
DL-S41-H2 Quick Guide Front and Rear Panels Front 1. AUTO/SOURCE - Auto / manual mode switching selection • Press and hold 3 seconds to switch between switching modes 2. POWER LED - Illuminates RED when power is applied 3. AUDIO MODE LED - Audio mode indicator •... - Page 4 DL-S41-H2 Quick Guide Rear 1. HDMI IN 1-3 - HDMI inputs 1 - 3 for HDMI sources 2. (ARC) HDMI IN 4 - ARC compatible HDMI input 3. HDMI OUTPUT - HDMI output to connect to display technology 4. AUDIO OUTPUT - 3.5mm audio output jack 5.
- Page 5 7. Connect the supplied IR receiver to the IR IN port to control switcher with supplied IR remote (optional) 8. Connect RS232 port for serial control (optional) Note: A complete list of RS232 commands are located in the DL-S41-H2 owners manual locate online at www.libav.com 9.
- Page 6 DL-S41-H2 Quick Guide Cabling Wiring Requirements RS232 Wiring Connect the 3rd party controller device RX signal to TX pin of the DL-S41-H2 DB9 breakout cable. Then connect the controller TX signal to the RX in to complete wiring. Audio Output Wiring...
-
Page 7: Technical Specifications
DL-S41-H2 Quick Guide Technical Specifications VIDEO Video Inputs (4) HDMI Video Input Connector (4) HDMI type A Input Video Signal HDMI Video Output (1) HDMI Video Output Connector (1) HDMI type A Output Video Signal HDMI Input Resolutions Support- Up to 3840 x 2160 @ 60Hz, 4:4:4, 8bit color depth Standards Compliant with HDMI 2.0b &... - Page 8 Thank you for your purchase. For Technical Support please call our toll free number at 800-530-8998 or email us at supportlibav@libav.com www.intelix.com www.libav.com Digitalinx is a brand of: 11675 Ridgeline Drive Colorado Springs, Colorado 80921 USA Phone: 719-260-0061 Fax: 719-260-0075...