Page 1
Version: 1.0.0 Driver Summary The DigitaLinx AV Switcher Driver manages the communication to the HDMI Matrix Switcher via IP. This driver will control routing inputs and outputs for the device, it is built to control 8 inputs and 8 outputs. You will be able to assign existing sources to the AV inputs and existing room displays to the Switcher outputs.
Page 2
System Requirements and dependencies Required minimum application versions to run the driver: ● Crestron Home v3.010.0098 ● AV Framework v12.00.006.0000 For additional information for this driver please visit the FAQs section on our website Installation/Upgrade Instructions Installation and dealer-facing configuration instructions. Please make sure you set the IP address of the main controller to a static IP on ●...
Page 3
Supported Models DL-HDM88A-H2 Contact Information If you have any questions please contact us at drivers@digitalautomation.us Version History 1.0.0 - Initial release 3/15/2021 Licensing and Copyright Information All product names, logos, brands, trademarks, and registered trademarks are the property of their respective owners. All company, product, and service names used in this manual are for identification purposes only.